How to Reset Alpha Boiler: Step-by-Step Guide
Estimated reading time: 3 minutes
Is your Alpha boiler not working properly? Don’t worry many times, a quick reset is all you need to get it working again. In this easy guide, we’ll explain when you should reset your Alpha boiler, how to do it safely, and what to do if it still doesn’t work after the reset.
Table of contents
When Should You Reset Your Alpha Boiler?
Before diving into the reset process, it’s important to know when a reset is the right step. Your Alpha boiler may need resetting if:
- The boiler has locked out (usually shown by a red or flashing fault light)
- There’s been a temporary fault like a power outage or frozen pipe
- The boiler is showing a fault code (e.g., E10, E20, or E96)
Tip: Always consult your boiler’s user manual for fault code meanings.
How to Reset Alpha Boiler
Time needed: 3 minutes
Resetting your boiler is usually simple and safe. The exact steps might vary slightly depending on the model (like Alpha E-Tec, Intec, or CD models), but here’s the general method:
- Identify the reset button
Look for a button labeled ‘RESET’ on the front control panel. It may be combined with a dial on older models (turn to ‘R’ position).
- Press and hold
Press and hold the reset button for 5–10 seconds. On dial-based models, turn to the reset position and hold for a few seconds.
- Wait for reboot
The boiler should begin its startup sequence. Lights or display codes will change; wait 1–2 minutes.
- Check for operation
If the boiler restarts normally and begins heating, you’re good to go. If the fault returns, move on to troubleshooting.
What to Do if the Reset Doesn’t Work
If your Alpha boiler won’t reset or keeps showing the same fault code:
- Check system pressure: Most Alpha boilers need at least 1.0 bar.
- Bleed your radiators: Air in the system can cause faults.
- Inspect for obvious issues: Like blocked vents or frozen condensate pipes.
Warning: If you smell gas or suspect a serious fault, turn off the boiler and call a Gas Safe engineer immediately.
Conclusion
Resetting your Alpha boiler is a quick and simple process that can save time and money. Make sure you only reset when appropriate and never ignore persistent faults. Regular servicing and checks can help keep your boiler running safely and efficiently all year round.
Frequently Asked Questions
Many issues with your Alpha boiler can be fixed by resetting it. To reset your boiler, all you need to do is rotate the front selector switch to the RESET position, leave it for 30 seconds and then put the selector back to its original position.
If you find that you keep having to reset your boiler, it’s likely that there could be a fault with your heating system. This fault could eventually lead to a more serious issue such as a boiler breakdown, so it’s best to seek out a solution as soon as possible.
A Boiler Reset Control is a devise that automatically controls the boiler water temperature according to a software program based on outdoor temperature. The water can be run a little cooler during fall and spring, and a little hotter during the coldest parts of the winter.
To reset a Baxi boiler, press the reset button or turn the knob to “R” and hold for 3 to 5 seconds. The boiler will restart automatically after a brief start-up sequence. Learn in detail about Reset Baxi Boiler.
